Read and Understand This Manual
Carefully read and understand this manual and all safety signs on the machine before operating the
machine. Safety signs must be in good condition and legible at all times. Replace missing or damaged
safety signs.
Never allow anyone to operate this machine without proper instruction, while fatigued or under the influence
of alcohol, prescription or non-prescription medication.
Keep your machine in proper working condition. Modifications to the machine may impair the function
and/or safety and affect the machine life and warranty.
If you do not understand any part of this manual, contact KRB Machinery.
Read All Instructions
1. Read Operators Manual before operating equipment.
2. Do not operate machine unless you are fully qualified, and properly trained.
3. Do not work on machine unless disconnect switch is turned off. Pad lock disconnect switch to avoid
unwanted start-up.
4. All bolts must be tight before machine is operated.
5. Do not operate machine with any guards or covers removed or open.
6. Always wear protective gear when operating machine i.e.: safety glasses, hard hat, steel tip shoes,
gloves, arm sleeves, etc.
7. Do not insert body parts into any part of equipment while it is running, or power is turned on.
8. Do not make any adjustments on equipment while machine is turned on or running.
9. Always stay alert while operating equipment.
10. Do not operate equipment in or around water i.e.: puddles, rain, etc.
11. Only qualified technicians should work on equipment.
12. Make sure all local and state codes are met with your electrical installation.
13. Keep area clean from debris at all times.
14. Equipment must be properly secured to floor.
15. Work stations and unauthorized people should remain a safe distance from the machine at all times.
To Next Page
Loading...