Kreg Jig HD - Attach the Stop Block; Check the Bit Setting

Setup
Attach the Stop Block
Kreg Wood Project Clamp (not included)
2
3
Check the Bit Setting
When using a Kreg Wood Project Clamp (not
included), slide the large clamp pad into the T-slot
recess on the back of the drill guide and lock it in
place with the end stop. When using an F-style
clamp or C-clamp, simply install the end stop.
These clamps do not lock onto the drill guide.
!
ATTENTION
3
⁄8"
(10mm)