12
Placement
Before you install an Evolution 202 preamplifier into your system, please follow the
guidelines in this section to select a location for your component. This will facili-
tate a clean, trouble-free installation.
The Evolution 202 preamplifier does not require a special rack or cabinet for instal-
lation. The preamplifier chassis measures 17.3 in. (43.8 cm) wide, 3.8 in. (9.7 cm)
high, and 18.3 in. (46.4 cm) deep.
The Evolution 202 preamplifier requires at least two inches of clearance on each
side, and at least two inches of clearance above the component to provide ade-
quate ventilation. Installation inside cabinetry may require additional ventilation.
AC Power Guidelines
The Evolution 202 pr
eamplifier has superb regulation and does not require a dedi-
cated AC circuit. Avoid connections through extension cords or multiple AC
adapters. High quality 15 amp AC strips are acceptable. The use of AC line condi-
tioning devices is not recommended. The features provided by these devices are
already incorporated into the Evolution 202 power supply.
(SECTION TWO: Unpacking and Placement continued)
To Next Page
Loading...
