7
In stand-by mode, all the analog circuitry continues to operate at the same bias
current; however, the main analog supply voltages decrease by 30 percent. The
result is a corresponding 30 percent reduction in power consumption and heat
without the need to wait for the electronics to “warm up” before listening.
Revolutionary Krell CAST Technology
Current Audio Signal Transmission, termed CAST, is a revolutionary method of
connecting analog audio components for unparalleled sonic performance.
Innovative engineering combines the new Krell CAST circuitry with existing Krell
Curr
ent Mode technology to create entire CAST systems that reproduce music
with incredible range, tonality, and precision.
The Voltage Signal Transmission
and the Traditional Audio System
Traditionally, signal is transmitted in the voltage domain between two components.
In an audio system, each component is a discrete entity with unique characteris-
tics that act upon the musical signal independently. Each component is unaware
of the other components in the system. The cables that connect the components
also have their own electrical characteristics, which affect the sonic presentation
of the entire system. CAST transmission unifies individual components and inter-
connects into an electrically-linked whole. The original signal r
emains unaltered
fr
om source to speaker.
CAST Basics
Her
e is how a CAST audio system works. Internally, each CAST source transfers,
or amplifies, curr
ent using Kr
ell Curr
ent Mode cir
cuitry
. This curr
ent signal is then
output using CAST cir
cuitry
. When the signal is r
eceived by a CAST input, Kr
ell
Current Mode circuitry again takes over until the signal reaches the loudspeaker.
By maintaining the musical signal in the curr
ent domain fr
om beginning to end, an
entir
e CAST system behaves as if it is one component. With CAST
, cir
cuit boar
d
properties and signal transmission aberrations between components are eliminat-
ed. Cable impedances and their ef
fects on the transmitted signal ar
e non-existent.
How CAST and Krell Current Mode Interact
While CAST is a new method of transferring the musical signal between compo-
nents, its origin stems from Krell Current Mode, the technology developed to
transfer the musical signal within a component. CAST combined with Krell Current
Mode takes circuitry signal transmission to the next evolutionary level. In essence,
continue
d
To Next Page
Loading...
