26
SECTION FIVE
Connecting the Evolution 202
to Your System
This section describes Evolution 202 Preamplifier connections.
Input and Output Connections
Krell recommends using its proprietary Krell CAST system for unparalleled sonic
performance for connections between the Evolution 202 preamplifier and other
CAST-equipped components. Krell CAST uses flexible interconnecting cables that
can be drawn through tight spaces and concealed.
The Evolution 202 also offers balanced operation. The circuitry and connections
associated with balanced operation not only can minimize sonic loss but also are
immune to induced noise, especially for installations using long cables.
XLR Pin Configuration
Pin 1 Ground
Pin 2 Non-inverting (0
O
)
Pin 3 Inverting (180
O
)
Inputs and outputs are located on the Evolution 202 back panels. Maintain the
correct left/right orientation, when hooking up your system.
To Next Page
Loading...
