Krell Industries EVOLUTION Evolution 202 - RC-5 Control

39
RC-5 Control
This function enables you to change the link transmit status of the Evolution 202.
The options are:
LINK TRANSMIT, LINK RECEIVE.
Enter the menu, then:
1. Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
RC-5 CONTROL.
2. Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control
. The front panel display (3) shows the default mode: LINK
TRANSMIT
.
3. Use the level control knob or the up and down keys to select the desired
option:
LINK TRANSMIT or LINK RECEIVE.
4. Press the enter button or key to confirm the selection. The front panel display
reads:
RC-5 CONTROL.
Recall
This function enables you to access factory default settings or your own saved
settings, or to undo a clone. The options are:
FACTORY, SAVED.
Enter the menu, then:
1. Use the level control knob on the preamplifier channel front panel or up and
down keys (14) on the remote control to select:
RECALL.
2. Press the enter button on the preamplifier channel front panel or the or enter
key (6) on the r
emote contr
ol. The fr
ont panel display (3) shows the default
mode:
F
ACTOR
Y
.
3. Use the level control knob or the up and down keys to select the desired
option:
FACTORY, or SAVED.
4. Press the enter button or key to confirm the selection. The front panel display
reads:
RECALL.
FACTORY
Recalls the factory settings.
SAVED
Recalls settings pr
eviously stored in memory using the
SA
VE
function. See also
Save, on the next page.
continue
d