KROHNE OPTIMASS Series User Manual

Installation and Operating Instructions OPTIMASS
16
OPTIMASS T10 to T25 - Heating Times
0.0
20.0
40.0
60.0
80.0
100.0
120.0
140.0
160.0
0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00
Time (hours)
32
52
72
92
112
132
152
172
192
212
232
252
272
292
312
Measuring Tube (centre) temperature (°C)
Measuring Tube (centre) temperature (°F)
OPTIMASS T 40 to T 80 - Heating Times
0.0
20.0
40.0
60.0
80.0
100.0
120.0
140.0
160.0
0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 24.00
Time (hours)
30
50
70
90
110
130
150
170
190
210
230
250
270
290
310
Measuring Tube (centre) temperature (°C)
Measuring Tube (centre) temperature (°F)
OPTIMASS H & S15 to 25 Heating Times
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 11.00
Time (hours)
32
52
72
92
112
132
152
172
192
212
Measuring Tube (centre) temperature (°C)
Measuring Tube (centre) temperature (°F)

KROHNE OPTIMASS Series Specifications

General

Housing Material	Aluminum, stainless steel
Measurement Principle	Coriolis
Flow Measurement	Mass flow, density, temperature
Accuracy	±0.1% of rate
Repeatability	±0.05% of rate
Pressure Range	Up to 400 bar
Communication Protocols	HART, PROFIBUS DP/PA, Modbus, Foundation Fieldbus
Materials	Stainless steel, Hastelloy
Approvals	ATEX, IECEx
Output Signals	4-20 mA, pulse, frequency
Protection Class	IP67
Process Connection	Flanged, threaded, sanitary
Power Supply	24 V DC, 100-240 V AC