
Do you have a question about the KROHNE UFC 030 F EEx Series and is the answer not in the manual?
| Series | UFC 030 F EEx |
|---|---|
| Application | Flow measurement in hazardous areas |
| Power Supply | 24 V DC |
| Protection Class | IP66/67 |
| Hazardous Area Approval | ATEX, IECEx |
| Type | Flow Converter |
| Process Connection | Flanged or threaded connections |
| Measurement Range | Depends on connected flow sensor |
| Accuracy | ±0.5% of reading |
| Operating Temperature | -20°C to +60°C |
| Explosion Protection | EEx ia IIC T6 |
| Input Signals | Signals from connected flowmeter sensor |
| Output Signals | 4-20 mA, HART |
| Certification | ATEX, IECEx |
| Housing Material | Aluminum or Stainless Steel (depending on version) |
| Display | LCD |












Loading...