MAL-OPS-0969 Version 2.2 5
2.3 Screens
The D3M displays the dose rate and accumulated dose on two separate screens, as
shown below.
Pressing the central button will toggle between the two screens instantly.
2.4 Pinning the Screen
If the user wishes to view one screen continuously, then it is possible to pin the
screen to avoid toggling between screens. Pressing the central button for
approximately one second displays a pin icon. The central button should be released
when this bar can be seen.
If a screen is pinned, this is indicated by a pin icon at the top of the screen.
To Next Page
Loading...