Table of Contents
2
Pos: 1 /BA/Konfor mitätserklärungen/ Rundballenpressen/Co mprima F/V XC - 1_RP025 @ 486\mod _1480514471200_78.doc x @ 3271101 @ @ 1
EC Declaration of Conformity
We
Maschinenfabrik Bernard Krone GmbH & Co. KG
Heinrich-Krone-Str. 10, D-48480 Spelle
hereby declare as manufacturer of the product named below, on our sole responsibility,
that the
Machine: Round Baler
Type: Comprima F 125 - 1, Comprima F 125 XC - 1,
Comprima F 155 - 1, Comprima F 155 XC - 1,
Comprima V 150 - 1, Comprima V 150 XC - 1,
Comprima V 180 - 1, Comprima V 180 XC - 1,
Comprima V 210 XC - 1
to which this declaration refers is in compliance with the following relevant provisions of:
• EC Directive 2006/42/CE (machines),
• EU Directive 2014/30/EU (EMC). Within the meaning of the Directive the
harmonised standard EN ISO 14982:2009 was taken as a basis.
The signing Managing Director is authorised to compile the technical documents.
Spelle, 20.04.2016
Dr.-Ing. Josef Horstmann
(Managing Director, Design & Development)
Year of manufacture: Machine no.:
Pos: 2 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
