Safety
21
1)
Before starting the machine,
read and observe the
operating instructions and
safety instructions.
Order No. 939 471-1 (1x)
2)
The PTO speeds must not exceed 1000 rpm!
The operating pressure of the hydraulic system
must not exceed 200 bar!
939 101-4
MAX.1000/min
MAX.200 bar
Order No. 939 101-4 (1x)
3) Order No. 939 576-0
(4x) bei EasyCut F 280; F 320, F 360
(2x) bei EasyCut F 280 M; F 320 M, F 360 M
a) Caution: some machine parts will stay in
operation for an extended period of time
before being switched off completely. Do not
touch any moving parts of the machine. Wait
until they have come to a complete stop.
b) Move the protective devices into protective
position prior to start-up.
c) When the machine is running, keep your
distance.
939 410 2
STOP
939 572-0
942197-1
3a 3b 3c
4)
While parts are moving, never
reach into areas where there is a
risk of being crushed.
Order No. 942 196-1 (2x)
5)
Order No. 939 106-3
(1x)
6)
Danger in the swivel range
(for EC F F 280 M / F 320 M / F 360 M only)
Order No. 939 472-2 (2x)
Pos: 13 /BA/----- ---------- Seitenumbruch------ ---------- @ 0\mod_1 19617531122 6_0.docx @ 41 65@ @ 1
939 472-2
942 196 -1
To Next Page
Loading...
Need help?
General
