Special equipment
75
• Install the plates (1,2). Make certain when attaching the plates that the distance from the
rubber pads (7) to the mower drums is at least 3 mm.
Note - Reinstallation is in the reverse order
Before starting up the machine again, make certain to check the cutter blades, retaining bolts,
cutting discs, and drums as well as the linings
• See Maintenance section “Checking the Cutter Blades and Retaining Bolts”.
• See Maintenance section “Periodical Inspection of Cutting Discs and Drums."
• See Maintenance section “Replacing the Linings".
Pos: 33.2 /BA/---- ------- ----Seitenumbruch----- ----------- @ 0\mo d_11961753112 26_0.docx @ 41 65 @ 2 @ 1
To Next Page
Loading...
Need help?
General
