Krone LOAD CARRIER - Maintenance Intervals for the Driver; Wheels and Tyres

MAINTENANCE AND REPAIR
Operating instructions • Load Carrier • 505410638-02 • 07/2019
113
Assembly group Maintenance work Monthly Every
six
months
Yearly
Load securing
► Perform a visual inspection for wear
and damage.
X
Superstructure
(see "10.2.13 Su-
perstructure",
pg.116)
► Check the bolted connections.
► Check all the superstructure compon-
ents and locks
X
10.2.3 Maintenance intervals for the driver
Assembly group Maintenance work Monthly Every
six
months
Yearly
Wheels and tyres
(see "10.2.4 Wheels
and tyres", pg.113)
► Check the tightening torques of the
wheel nuts.
► Check the tyres and the tyre inflation
pressure.
X
Axle and suspen-
sion (see "10.2.5
Axle and suspen-
sion", pg.114)
► Observe the maintenance instructions
from the axle manufacturer.
X
Compressed air
system (see "5.8
Draining the com-
pressed air tanks",
pg.35)
► Check the compressed air tank.
► Check the compressed air connec-
tions.
X
Contour marking
(see "10.2.9 Contour
marking", pg.115)
► Check the contour markings for com-
pleteness and legibility.
X
Load securing (see
"10.2.11 Load secur-
ing", pg.115)
► Perform a visual inspection for wear
and damage.
X
Lubrication points
(see "10.2.7 Lubric-
ating the trailer",
pg.115)
► Top up the grease on all the lubrica-
tion points.
► Pay attention to the lubrication points
shown in the applicable operating in-
structions.
X
10.2.4 Wheels and tyres
► Check the tightening torques of the
wheel nuts. The tightening torque de-
pends on the rim design.
► Observe the supplier documentation.
► Perform a visual inspection for wear
and damage:
○ Check the tread depth of the tyres reg-
ularly.
○ Check the tyres for damage.