How to fix rear lights on Krone Utility Vehicle?
If the rear lights, direction indicators, or position lamps on your Krone Utility Vehicle aren't working, the first step is to replace any defective bulbs. Also, make sure that the supply and control connections between the tractor and trailer are properly connected.
What to do if Krone Utility Vehicle brakes abnormally?
If you experience braking abnormalities with your Krone Utility Vehicle, where the trailer and tractor brake abnormally in combination, it might be due to a failure to perform the brake power/train tuning. You should perform a brake power/train tuning with the allocated tractor unit.
Why pneumatic components are not working on Krone LOAD CARRIER?
If the pneumatic components on your Krone Utility Vehicle are not working, it might be due to leaks. Check the components for damage and leaks and have repairs/replacements performed by a specialist workshop.
What to do if the lift axle no longer functions on Krone LOAD CARRIER?
If the lift axle on your Krone Utility Vehicle no longer functions, it could be due to faults on the lift axle control because of defective lift axle valves, or incorrect controls from the tractor unit. Check that the supply and control connections between the tractor unit and trailers are properly connected. Contact an authorised specialist workshop or customer service.
General| Brand | Krone |
|---|---|
| Model | LOAD CARRIER |
| Category | Utility Vehicle |
| Language | English |
Explains the purpose and target audience of the operating instructions.
Details how to identify the trailer using its type plate and VIN.
Explains the structure and classification of warnings and danger levels.
Defines the proper and intended use of the KRONE trailer and superstructures.
Identifies specific areas around the trailer that pose a safety risk.
Introduces illustrations of the trailer's design and key components.
Describes the initial commissioning process performed by the manufacturer.
Outlines the procedures for trailer delivery and handover.
Instructions for correctly using wheel chocks to prevent trailer movement.
Instructions and warnings related to operating the trailer's landing leg winches.
Overview of the trailer's brake system, including EBS.
Information on operating the trailer's air suspension system.
Step-by-step guide on how to change a spare wheel.
Instructions for operating the rear gantry and its components.
Overview of the sliding curtain superstructure and its components.
Overview of the full-tarp superstructure.
Safety and operational instructions for hydraulic lifting roofs.
Checklist for ensuring road safety before driving.
Procedures and safety warnings for hitching and unhitching trailers.
Instructions on how to use lashing straps correctly and safely.
Information about KRONE trailers equipped with load securing rails.
Overview of the Multi Safe system and its components.
How to address braking abnormalities and tuning issues.
Guidelines for cleaning the trailer and its components safely.
Outlines checks and periodic maintenance for workshops and drivers.
General safety and procedural guidelines for repair work.
Measures to be taken for temporarily decommissioning the trailer.
Steps to take to recommission the trailer after temporary decommissioning.
Information on ordering original spare parts and their importance.
Contact details for KRONE customer service and spare parts.
Lists dimensions and weights for different trailer variants.
Details on connector types and pin assignments.
To Next Page
