13
3.5.1 Loading the Paper in Peel-off Mode
Note: Both thermal paper and plain paper apply for peel-off function but
neither PVC nor vynle work at peel-off function.
1. Insert a 1” label spindle into a paper roll.
2. Open the printer top cover by pulling the top cover open levers. The top cover support
will hold the printer top cover.
Fig. 18 Open the top cover
3. Install the paper roll on the paper roll mount.
4. Open the peel-off panel by pulling it out.
Fig. 19 Open the peel-off panel
Peel-off
panel
Top Cover Open Lever
Peel-off panel
Backing paper
Opening
To Next Page
Loading...
Need help?
General