4.2 Preparing coffee-based drinks with coffee beans
n This section explains how to operate the machine using its features, taking the example of espresso
and cappuccino.
n Espresso
KRUPS SERIE EA9000
22
1
n Press the “Espresso” button on the touch screen.
n If the machine detects no beans when you request this recipe, it will ask
you to fill the bean container (see section 2.3).
n If the machine detects no water when you request this recipe, it will ask
you to fill the tank.
2
n Place the cup(s) under the coffee nozzles.
n You can lower or raise the coffee nozzle to suit the size of your cup(s).
3
n Possible settings
n You can prepare one or two cups with your appliance.
n Choosing the strength: The more beans you select, the stronger the
preparation will be. You can modify the strength using the arrows on the
left and right of the symbols (except in the case of double espressos).
n Choosing the volume: The screen displays the last volume setting
associated with espresso. You can modify this volume using the arrows
on the left and right of the indicated value .
n Press the “Start” button on the touch screen to start the preparation.
4
n Preparing an espresso
n The machine starts preheating, if required, and then grinds the beans,
tamps the ground coffee and finally brews the coffee.
n You can adjust the coffee volume during the cycle using the up and down
arrows.
n You can stop the preparation by pressing the “Stop” symbol or the On/Off
button (1) or the ground coffee button (2).
n Remove the cup when the screen shows: Your espresso is ready.
To Next Page
Loading...
Need help?
General
