Krups ESPRESSO AUTOMATIC SERIE EA9000 User Manual

KRUPS SERIE EA9000
42
n Manual cleaning of the steam nozzle
The machine can ask you to clean the nozzle manually or can clean it on your request. Manual cleaning
is requested depending on the number and type of milk recipes prepared.
Below are the main steps in this manual cleaning of the nozzle when requested by the user. Otherwise,
just follow the instructions on the screens displayed by the machine.
1
n You can access the “Maintenance” menu from the main menu by
pressing the “Maintenance” tab.
n To clean the nozzle and its container, you must follow the sequence shown
in the Maintenance tab.
n Failure to follow this sequence may damage the system.
n Press the “Manual cleaning of the nozzle” button on the touch screen.
n To quit the “Maintenance” menu, press the “Maintenance” tab.
2
n The nozzle comes out of the cleaning container.
n You can clean all of the parts of the machine located behind the coffee
nozzle.
3
n Remove the two drip trays.
n Empty and clean them.
n The nozzle moves forward and slightly downward.
4
n Unscrew the nozzle tip (10) with the steam nozzle (9).
n Do not remove the tip seals, as this may damage them and affect the
frothing performance.
Caution: Risk of scalding while unscrewing; the temperature of the nozzle can be high (> 50°C).
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page42

Krups ESPRESSO AUTOMATIC SERIE EA9000 Specifications

General

Water Tank Capacity	1.7 L
Bean Hopper Capacity	250 g
Pump Pressure	15 bar
Adjustable Coffee Strength	Yes
Adjustable Temperature	Yes
Color	Black
Power	1450 W
Voltage	220-240 V
Programmable	Yes
Removable Brew Group	Yes
Automatic Rinsing and Cleaning	Yes
Cup Warmer	Yes
Adjustable Milk Froth	Yes
Number of Coffee Specialties	17
Hot Water Function	Yes
Pre-ground Coffee Option	Yes
Type	Espresso Machine
Milk Frother	Yes
Grinder	Integrated