KRUPS SERIE EA9000
44
n Cleaning the steam nozzle cleaning container
1
n You can access the “Maintenance” menu from the main menu by
pressing the “Maintenance” tab.
n To clean the nozzle and its container, you must follow the sequence shown
in the Maintenance tab.
n Failure to follow this sequence may damage the system.
n Press the “Cleaning container” button on the touch screen.
2
n Then follow the instructions on the screen, referring to the visuals in step
9 in the manual cleaning of the nozzle until you see the screen on the right.
n This cleaning cycle is finished.
9
n Replace the two drip trays (see visuals p. 13).
n The manual steam nozzle cleaning cycle is finished.
n Press OK to confirm and quit.
Caution: The manual cleaning of the nozzle and the cleaning container must be carried out in this
sequence: If not, you risk damage to the steam nozzle assembly, malfunction or breakage.
!
To Next Page
Loading...
