DEFRNLIT
EN
43
ENGLISH
5
n Clean the three holes on the nozzle tip using the pin supplied for this
purpose with the Welcome Pack. You must fully separate the two
parts to clean them properly.
n Do not wash the tip in the dishwasher.
n Caution: clean the tip properly.
n Press the “OK” button.
6
n The steam tube moves down.
n You can thus clean it properly with a damp cloth (you can use a little
washing-up liquid, but rinse it thoroughly). The steam tube cannot be
dismantled.
n Press the “OK” button. The steam tube moves up so that the nozzle
tip and the nozzle can be refitted.
7
n Re-screw the nozzle with the tip onto the steam tube.
n Press the “OK” button.
n The steam nozzle assembly moves up and stops above the cleaning
container.
8
n Cleaning the steam nozzle cleaning container (11).
n Press YES to the question: “Do you want to clean your cleaning
container?” if you want to clean it.
n Press the top of the container to remove it. Clean it under running
water.
n To put the container back, first position the lower part and then press
the upper part: you should hear a “click”.
n Press the “OK” button.
h
h
To Next Page
Loading...
