KRUPS SERIE EA9000
28
4.4 Preparing other drinks: hot milk with or without froth, and hot water
n Hot milk with frothing
1
n Press the “Hot Milk” button on the touch screen.
n If the machine detects no water when you request this recipe, it will ask
you to fill the tank.
2
n Choosing: with or without froth.
n Check the “Frothing” box if you want froth in addition to hot milk.
n When you choose a milk recipe “without frothing”, there can still be a very
fine layer of froth.
n Press the “Start” button to start the preparation.
3
n Choosing the volume (small/medium/large).
n The screen displays the volume of milk to be poured into the cup. You can
modify this volume using the arrows on the left and right of the indicated
value.
4
n Fill the cup with the volume of milk indicated on the screen.
5
n Place the cup under the coffee nozzles.
n The cup must be placed close to the cleaning container, under the steam
nozzle, at the back of the niche.
n However, do not press the cleaning container (11) with the cup; otherwise,
it might break off.
n You can lower or raise the coffee nozzle to suit the size of your cup. The
steam nozzle will descend just behind the coffee nozzles. Caution: the
maximum height of the cup is defined by the coffee nozzles; do not tilt the
cup to place it under the coffee nozzles.
n To use a large cup (or mug), you might have to remove the small drip tray
(6).
n Press the “OK” button.
To Next Page
Loading...
Need help?
General
