DEFRNLIT
EN
29
ENGLISH
6
n Milk preheating phase.
n The nozzle moves forward and goes down into the milk
n The nozzle tip (10) must be submerged in the milk by 1 cm for perfect
results. If this is not the case, the cup is not suitable for the volume
chosen; stop the preparation using the “Stop” button and change
the cup.
n If the milk used is at an initial temperature higher than 7°C, you can
shorten the preheating time by pressing “>>” and move on to
frothing to avoid “spoiling” the recipe.
7
n Milk frothing phase: The milk is then frothed according to the
chosen recipe.
n You can increase or decrease the frothing time. (Make sure the cup
does not overflow).
n Press the “>>” button to stop the frothing.
8
n The nozzle moves up and draws back to return to its cleaning
container.
n Remove the cup when the screen shows: Your milk is ready.
9
n Rinsing the nozzle.
n The nozzle is rinsed automatically. You must wait for this rinsing to
be complete before starting the next preparation.
To Next Page
Loading...
