KRUPS SERIE EA9000
50
4
n Place a recipient with a capacity of at least 0.6 litres under the coffee
nozzles and press OK.
n The descaling phase will start.
5
n When the descaling is complete: Empty your recipient and put it
back, then empty the water tank, rinse it well and fill it again.
n The first rinsing will start.
6
n End of the first rinsing: Empty your recipient and replace it.
7
n End of the second rinsing and of the steam circuit descaling phase.
n The nozzle returns to its cleaning container.
n Refit the Claris Aqua Filter System filter, if necessary.
n Empty your recipient and fill the water tank.
Caution: During the descaling or coffee circuit cleaning programmes, water can splash quite strongly.
If required, place a paper towel on the drip tray.
!
To Next Page
Loading...
