21
IMPORTANT INFORMATION CONCERNING THE APPLIANCE AND INSTRUCTIONS
In this manual you will nd all of the important information concerning the preparation, use and maintenance of your
machine.
Read the instructions carefully before using your appliance for the rst time and keep them for future reference: KRUPS
may not be held liable in the event of any use that does not comply with the instructions.
GUIDE TO THE SYMBOLS USED IN THE INSTRUCTIONS
Warning: Risk of serious injury or death. The lightning bolt symbol warns against electrical dangers.
Warning: Risk of possible malfunction, damage, or destruction of the appliance.
!
Warning: General or important note concerning the operation of the appliance.
Products supplied with your machine
Check the products supplied with your machine. If any parts are missing, contact your hotline (see p. 22: Initial settings).
Parts supplied:
- Espresso Automatic Series EA89
- 2 cleaning tablets
- 1 descaling sachet
- Milk conduit adaptable to the “One Touch Cappuccino” block
- Dismantling key for cleaning the steam circuit
- Safety instructions booklet
- Claris – Aqua Filter System cartridge with tting accessory
- 1 stick for testing water hardness
- Instructions
- List of approved Krups service centres
- Guarantee documents
TECHNICAL DATA
Appliance Espresso Automatic Series EA89
Power supply 220-240V~ / 50 Hz
Pump pressure 15 bars
Coffee bean container 250 g
Power consumption During operation: 1,450 W
Standby power consumption Connected mode: 0,72 W
Water tank 2.3 l
First use and storage Indoors, in a dry place (protected from frost).
Dimensions (mm) H x L x D 367 x 240 x 380
Weight EA89 (kg) 8.4
Frequency of the Bluetooth module 2.40 MHz
Output produced by the Bluetooth module 7.7dBm
Subject to technical adaptations.
20
EN
APPLIANCE DESCRIPTION
A Water tank handle/lid
B Water tank
C Coffee grounds collector
D Height-adjustable coffee outlets
E Grid and removable drip tray
F Coffee bean container lid
G One Touch Cappuccino removable block
G1 Dismantling key for cleaning the steam
circuit
G2 One touch cappuccino block
H Milk tube and connector
I Water level oat.
1
Coffee bean container
J Grinding neness adjustment dial
K Cleaning tablet funnel
L Metal grinding mill
2
Display panel
M Display
N “On-off” button
O Tactile buttons
Specic information about:
The drip tray: it allows you to collect water or coffee that might ow out of the appliance during and after preparation.
It is important to always leave it in place and to empty it regularly.
!
Important : Read these instructions carefully and keep them for future reference. Please follow the safety guidelines.
Manufacturer:
SAS GSM
Rue Saint-Léonard F-53104 Mayenne
France
OVERALL VIEW
Presentation of the different buttons
Button Description / General functions
Switching the machine on and off.
It is necessary to press and hold the button to start the machine.
Allows you to return to the previous screen or stop a recipe in progress.
Browse upwards in the menu / increment the parameter selected
Browse downwards in the menu / decrement the parameter selected
Conrmation of selection.
Function for increasing the strength of the coffee.
Function for adding a strong espresso to the recipe selected.
Accessible with the main recipes (espresso, long coffee, cappuccino, Macchiato, tea) according
to model.
Starts preparing an espresso.
Starts preparing a Coffee.