27
EN
launch an additional pre-heating phase.
A menu will allow you to customise the frothing time. You can modify it by pressing buttons
or . Then press
. The last frothing time used will be memorised for the next preparation.
You can download the preparation at any time by pressing
.
Rinsing the “One Touch Cappuccino” block
Please refer to the paragraph “Milk rinsing” in the section PREPARING ONE TOUCH MILK DRINKS.
OTHER FUNCTIONS
The Settings menu can be accessed via button which leads to the general menu (machine settings maintenance
and product information).
Settings
By selecting the Settings menu, you can make the changes you want in order to optimise your ease of use and suit
your preferences.
Below are the main settings available.
Date You must set the date, particularly when you are using an anti-limescale cartridge.
Clock You can select to display a 12 or 24-hour clock.
Language You can select the language of your choice from those offered.
Measuring unit You can set the unit of measurement to be ml or oz.
Screen brightness You can adjust the screen brightness according to your preferences.
Coffee temperature You can adjust the temperature of your coffee drinks to three different levels
Tea temperature You can adjust the temperature of your teas to three different levels
Water hardness You can set your water hardness from 0 to 4. See chapter “Measuring water hardness”.
Auto-on You can automatically start pre-heating of the appliance at a selected time.
Auto-off
You can choose the duration after which your appliance will switch off automatically
(duration of non use).
Automatic rinsing
You can choose to activate automatic rinsing of the coffee outlet or not when starting
the machine.
Drinks settings
You can restore the default settings. You can also permanently activate the Dark and
Extra Shot function for all your drinks (except
).
To quit the settings menu, press
or the Settings button.
The settings will be stored in the memory if you unplug your machine, with the exception of the date and time.
Maintenance
All of these options allow you to run the selected programs. You should then follow the on-screen instructions.
Cleaning milk
Provides access to cleaning the machine’s one touch cappuccino block, which is essential
for ensuring good quality milk frothing.
Milk rinsing
Provides access to rinsing the machine’s one touch cappuccino block, which is essential for
ensuring good quality milk frothing.
Coffee rinsing
Provides access to rinsing the machine’s coffee circuit, which ensures the optimum taste
of coffee.
Every time “Cappuccino”or “Macchiato” is run, the machine will remember the last drink prepared, including the
settings that were selected.
Cleaning after preparing milky drinks
Milk rinsing
The screen indicates “Rinse milk?” at the end of each preparation.
It is advised to rinse after using the milk function in order to ensure the cleanliness of the frothing accessories and the
frothiness of the milk.
During milk rinsing, you are required to systematically dismantle and clean the milk tube and connector with hot water.
Fig. 21 and 25.
For the best results, it is advised to clean the “One Touch Cappuccino” removable block regularly (see general
maintenance chapter).
If you note a change in the quality of your milk froth, do not hesitate to repeat the rinsing and cleaning process: indeed
a milk system that is not well maintained may cause this type of problem.
PREPARING TEAS
Possible settings
Your appliance allows you to prepare three types of tea (green tea, black tea, herbal tea). You can adjust the volume
of the drink to taste.
The hot water temperature is adapted to the drink selected.
You can program an extra shot
in your tea which will allow you to prepare “tea/coffee” drinks that are very
fashionable.
Preparing a tea
Select on the screen. Place the cup(s) under the coffee nozzles. Fig.12
Then select the chosen drink and press
.
If the machine detects no water when you submit your request, it will ask you to ll the tank.
You can modify the volume by using buttons
or during preparation.
PREPARING OTHER DRINKS: RISTRETTO, DOPPIO, AMERICANO
OR FROTHY MILK
Preparation
Place the cup(s) under the coffee nozzles. Fig.12
If the machine detects no water when you submit your request, it will ask you to ll the tank.
Press button
: with buttons and , select the desired drink: Ristretto, Doppio, Americano, Frothy milk.
Making a Ristretto
Select Ristretto and press .
The machine starts by grinding the beans, tamping the ground coffee and nally brewing the coffee. It is possible to
adjust the volume of the coffee being prepared by using the buttons:
and .
You can stop the preparation at any time by pressing
.
Making a Doppio
Select DOPPIO and press .
The preparation is identical to the RISTRETTO but with a double coffee cycle.
Making an Americano
Select AMERICANO and press .
The preparation is identical to the DOPPIO, but is followed by hot water.
Making a Frothy milk
Connect the straight side of the milk tube to the “One Touch Cappuccino” removable block Fig. 13. Immerse the other
end (bevelled side) in a receptacle lled with milk. Fig.14
The steam is used to froth the milk. As a higher temperature is required when producing steam, the appliance will
26
To Next Page
Loading...
Need help?
General
