KSB BOA-SuperCompact - 10 EU Declaration of Conformity; EU Declaration of Conformity for BOA-H, BOA-R

10 EU Declaration of Conformity
50 of 60
10 EU Declaration of Conformity
10.1 EU Declaration of Conformity for BOA-H, BOA-R
Herewith we, KSB SE & Co. KGaA
Johann-Klein-Straße 9
67227 Frankenthal (Germany)
declare that the product:
BOA-H EN-GJL-250 PN 16 DN 15-300
BOA-H EN-GJS-400-18-LT PN 16 DN 15-350
39)
BOA-H EN-GJS-400-18-LT PN 25 DN 15-150
40)
BOA-R EN-GJL-250 PN 6 DN 15-200
BOA-R EN-GJL-250 PN 16 DN 15-300
BOA-R EN-GJS-400-18-LT PN 16 DN 15-350
39)
satisfies the safety requirements laid down in the Pressure Equipment Directive 2014/68/EU.
Applied harmonised European standards:
Globe valves/Lift check valves: EN19, EN12516-3, EN12266-1, EN13789, EN1092-2
Lift check valves: EN12334
Other standards/codes:
DIN3840 Paras. 1.3 and 4.3
39)
and
40)
to AD2000 code
Suitable for:
Fluids in Groups 1 and 2
Conformity assessment procedure:
Module H
Name and address of the notified body responsible for approval and surveillance:
TÜV SÜD Industrie Service GmbH
Westendstraße 199
80686 München (Germany)
Identification number of the notified body:
0036
Valves ≤ DN 25 fall under Article 4, Section 3, of the Pressure Equipment Directive 2014/68/EU. They must bear
neither the CE marking nor the identification number of a notified body.
The EU Declaration of Conformity was issued in/on:
Frankenthal, 1 February 2018
Wolfgang Glaub Dieter Hanewald
Vice President Integrated Management Germany Head of Development, Low-pressure Valves
39) DN 15-200 to AD2000 code
40) To AD2000 code