KSB Calio - EU Declaration of Conformity

11 EU Declaration of Conformity
65 of 68
Calio
11 EU Declaration of Conformity
Manufacturer: KSB SE & Co. KGaA
Johann-Klein-Straße 9
67227 Frankenthal (Germany)
This EU Declaration of Conformity is issued under the sole responsibility of the manufacturer.
The manufacturer herewith declares that the product:
Calio
From serial number: xxxxxxxx-A201920-00001
▪ is in conformity with the provisions of the following Directives as amended from time to time:
– Pump (set): 2006/42/EC Machinery Directive
– 2009/125/EC: Creation of a framework for the stipulation of requirements for the environmentally
compatible design of energy-related products (Ecodesign Directive), Regulation No. 641/2009 and/or
622/2012
– Electrical components
8)
: 2011/65/EU Restriction of the use of certain hazardous substances in electrical and
electronic equipment (RoHS)
– 2014/30/EU: Electromagnetic Compatibility (EMC)
– 2014/35/EU: Electrical Equipment Designed for Use within Specific Voltage Limits (Low Voltage)
The manufacturer also declares that
▪ the following harmonised international standards have been applied:
– EN 809
– EN 60335-1, EN 60335-2-51
– EN 61000-6-1, EN 61000-6-3
– EN 16297-1, EN 16297-2
Person authorised to compile the technical file:
Jennifer Watson
Project Coordination Pump Systems and Drives
KSB SE & Co. KGaA
Johann-Klein-Straße 9
67227 Frankenthal (Germany)
The EU Declaration of Conformity was issued in/on:
Frankenthal, 1July2019
Jochen Schaab
Head of Product Development Pump Systems and Drives
KSB SE & Co. KGaA
Johann-Klein-Straße 9
67227 Frankenthal
8) Where applicable