KTM 1190 ADVENTURE User Manual (English)

Questions and Answers:

R
Rose GreenAug 23, 2025
Why does my KTM Motorcycle engine not crank when pressing the electric starter button?
- J
  Julie GuerreroAug 23, 2025
  Several factors could prevent your engine from cranking. Ensure the emergency OFF switch is in the ON position. Make sure you are following the correct start procedure. A discharged battery can also cause this issue, so recharge the battery and check the quiescent current. Other potential causes include a faulty safety start system, disabled ICU, CAN bus communication error, or a fault in the EFI or MCU control unit.
M
Mr. Cody Watts DDSAug 31, 2025
Why does my KTM Motorcycle engine turn over but not start?
- J
  James ManningAug 31, 2025
  If your KTM Motorcycle engine turns but does not start, it could be due to a fault in the fuel injection system, so read out the fault memory using the KTM diagnostics tool. Alternatively, the fuel quality might be insufficient, so add suitable fuel.
F
floydbrendaAug 30, 2025
What does it mean when the engine warning lamp lights up on my KTM 1190 ADVENTURE?
- C
  Christine HendersonAug 30, 2025
  If the engine warning lamp lights up or flashes on your KTM Motorcycle, it indicates a fault in the fuel injection system, so read out the fault memory using the KTM diagnostics tool.
W
watkinsmarkAug 29, 2025
What to do if KTM 1190 ADVENTURE Motorcycle engine won't crank with the electric starter?
- N
  Nicole RobersonAug 29, 2025
  If your KTM Motorcycle engine does not crank when the electric starter button is pressed, it could be due to several reasons. First, check if the emergency OFF switch is off and set it to the ON position. Another reason might be an operating error, so carry out the start procedure. A discharged battery could also be the cause, so recharge it and check the quiescent current. Other potential causes include a faulty safety start system, an ICU that is not enabled (so activate the ICU), a CAN bus communication error, a fault in the EFI control unit, or a fault in the MCU control unit. For the last four, you should read out the fault memory using the KTM diagnostics tool.
S
Shawn OsbornAug 28, 2025
What to do if KTM Motorcycle engine turns but does not start?
- R
  rubendiazAug 28, 2025
  If your KTM Motorcycle engine turns over but doesn't start, it could be due to a defect in the fuel injection system, and you need to read out the fault memory using the KTM diagnostics tool. Another possibility is insufficient fuel quality, so you should add suitable fuel.
K
Kayla MayerAug 27, 2025
What to do if my KTM 1190 ADVENTURE Motorcycle engine turns but does not start?
- E
  Emily BrownAug 27, 2025
  If the engine turns over but doesn't start, it could be due to a defect in the fuel injection system. Another potential cause is insufficient fuel quality, so add suitable fuel.
K
Karen JonesAug 26, 2025
Why does my KTM 1190 ADVENTURE have high oil consumption?
- R
  Rebecca AguilarAug 27, 2025
  High oil consumption can be attributed to a couple of reasons: The engine oil level may be too high, so check it. Alternatively, the engine oil might be too thin (low viscosity), so change the engine oil and filter, and clean the oil screens.
M
Matthew ZunigaAug 25, 2025
Why does the engine warning lamp light up or flash on my KTM Motorcycle?
- S
  Shannon LeeAug 26, 2025
  The engine warning lamp illuminates due to a defect in the fuel injection system.
Z
zachary76Aug 25, 2025
What to do if my KTM 1190 ADVENTURE Motorcycle engine dies during the trip?
- S
  Samuel PalmerAug 25, 2025
  If your engine dies while riding, it could be due to a lack of fuel, so refuel. It may also indicate a defect in the fuel injection system.

KTM 1190 ADVENTURE Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1195 cc
Bore x Stroke	105 mm x 69 mm
Torque	125 Nm @ 7500 rpm
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Front Suspension	WP USD Ø 48 mm
Rear Brake	Single 267 mm disc, 2-piston caliper
ABS	Bosch 9ME Combined ABS
Fuel Tank Capacity	23 liters
Seat Height	860 mm
Dry Weight	217 kg
Compression Ratio	12.5:1
Starter	Electric
Wheelbase	1560 mm
Ground Clearance	220 mm
Power	110 kW (150 hp) @ 9500 rpm
Rear Suspension	WP monoshock
Front Brake	Twin 320 mm discs, 4-piston calipers
Frame	Chromium-Molybdenum steel trellis frame, powder coated

Summary

SAFETY ADVICE

Use definition - intended use

Defines the intended operational use of the KTM motorcycle.

Safety advice

Provides general safety instructions and highlights important warnings.

Degrees of risk and symbols

Explains different levels of danger and their associated symbols.

Safe operation

Provides crucial guidelines for safe operation, including hazards.

Protective clothing

Emphasizes the importance of wearing appropriate protective clothing.

IMPORTANT NOTES

Service

Highlights the importance of proper service and maintenance for longevity.

SERIAL NUMBERS

Chassis number

Explains where to find the chassis number on the vehicle.

Engine number

Indicates the location of the engine number stamped on the engine.

CONTROLS

Switches on the left side of the handlebar

Covers the combination switch and its functions like light, hazards, signals.

Switches on the right side of the handlebar

Details the emergency OFF and electric starter buttons.

COMBINATION INSTRUMENT

Overview

Provides an overview of the instrument cluster components.

Matrix display

Describes the matrix display and its control via the menu switch.

Segment display

Details the elements shown on the segment display.

Indicator lamps

Lists and explains the various indicator lamps on the instrument cluster.

Message on the matrix display

Explains how messages are displayed and confirmed on the matrix display.

Matrix display menu

Introduces the menu system for the matrix display.

MTC/ABS

Details the Motorcycle Traction Control and ABS settings.

Drive Mode

Covers different riding modes like Sport, Street, Rain, Offroad.

ERGONOMICS

PREPARING FOR USE

Advice on first use

Offers essential advice for the initial use of the motorcycle.

Running in the engine

Provides guidelines for the engine running-in phase.

Loading the vehicle

Gives warnings and advice on loading the vehicle safely.

RIDING INSTRUCTIONS

Checks and maintenance measures when preparing for use

Lists pre-ride checks and maintenance tasks for roadworthiness.

Starting

Details the procedure for starting the motorcycle engine.

Shifting, riding

Covers gear shifting techniques and general riding advice.

Applying the brakes

Provides instructions and warnings on using the braking system.

Stopping, parking

Guides on how to safely stop and park the motorcycle.

Refueling

Details the procedure and safety precautions for refueling.

SERVICE SCHEDULE

Required work

Lists mandatory service tasks at specified intervals.

SUSPENSION SETTING

"Damping" (Option: With EDS)

Explains how to adjust suspension damping for different riding conditions.

"Load" (Option: With EDS)

Details how to set suspension based on vehicle loading.

SERVICE WORK ON THE CHASSIS

Cleaning the chain

Explains the procedure for cleaning the motorcycle chain.

Checking the chain tension

Details how to check the chain tension.

Adjusting the chain tension

Provides instructions for adjusting the chain tension.

Checking/rectifying the fluid level of the hydraulic clutch

Explains how to check and adjust the hydraulic clutch fluid level.

Checking the steering head bearing play

Details how to check for play in the steering head bearing.

BRAKE SYSTEM

ABS/antilock brake system

Explains the ABS system, its functions, and limitations.

Checking the brake discs

Provides instructions for checking brake disc wear and condition.

Checking the brake fluid level of the front brake

Explains how to check the front brake fluid level.

Checking the front brake linings

Describes how to check the thickness of the front brake linings.

Checking the rear brake fluid level

Explains how to check the rear brake fluid level.

Checking the rear brake linings

Describes how to check the thickness of the rear brake linings.

WHEELS, TIRES

Removing the front wheel

Step-by-step guide for removing the front wheel.

Installing the front wheel

Step-by-step guide for installing the front wheel.

Removing the rear wheel

Step-by-step guide for removing the rear wheel.

Installing the rear wheel

Checking the tire condition

Checking the tire air pressure

ELECTRICAL SYSTEM

Recharging the battery

Changing the main fuse

Changing the fuses in the fuse box

Checking the headlight setting

Adjusting the headlight range

Activating/deactivating the ignition key

COOLING SYSTEM

Checking the coolant level in the compensating tank

Correcting the coolant level in the compensating tank

TUNING THE ENGINE

"Drive Mode"

Describes the different riding modes affecting engine and traction control.

MTC/motorcycle traction control

Explains the function and control of the motorcycle traction control system.

SERVICE WORK ON THE ENGINE

Checking the engine oil level

Provides instructions on how to check the engine oil level.

Changing the engine oil and filter, cleaning the oil screens

Details the procedure for changing engine oil and filter.

Adding engine oil

STORAGE

Storage

Preparing for use after storage

TECHNICAL DATA

Engine

Lists detailed technical specifications for the engine.

Engine tightening torques

Engine oil capacities

Coolant capacities

Fuel capacities

Chassis

Electrical system

Tires

Fork

Shock absorber

Chassis tightening torques

SUBSTANCES

Brake fluid DOT 4 / DOT 5.1

Coolant

Engine oil (SAE 10W/50)

Engine oil (SAE 5W/40)

Super unleaded (ROZ 95/RON 95/PON 91)

Related product manuals

KTM 1190 ADVENTURE R

229 pages

KTM 1190 Adventure EU

225 pages

KTM 2014 1190 Adventure

228 pages

KTM 1190 Adventure 2016

10 pages

KTM 1190 Adventure 2014

KTM 2008 1190 RC8 USA

247 pages

KTM 1190 RC8 R EU/UK 2009

242 pages

KTM 2013 1190 RC8 R EU/UK

272 pages

KTM 1190 ADVENTURE User Manual

Table of Contents