KTM 1290 Super Duke GT Series User Manual

2 SETUP 4
–
Tighten screws

evenly.
Guideline
Screw, handlebar clamp M8 20 Nm
(14.8 lbf ft)
S01186-10
–
Tighten screws

and

of the controls.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Screw, combination switch, right M5 3.5 Nm
(2.58 lbf ft)
– Mount right handlebar weight, tighten screw.
Guideline
Screw, handlebar weight M6 10 Nm (7.4 lbf ft)
– Check the throttle grip for smooth operation.
E00278-01
– Mount and tighten the rear mirror on both sides.
E00279-10
–
Position windshield

.
–
Mount and tighten screws

.
Guideline
Screw, windshield M5 3.5 Nm
(2.58 lbf ft)
E00277-01
– Tape on the protective plastic sheet for the swingarm.
– Remove the cable ties of the rider footrests.
E00281-10
–
Mount splash protector

with screws

on license plate holder

.
Guideline
Remaining screws, chassis EJOT PT
®
K50x12 1 Nm (0.7 lbf ft)

KTM 1290 Super Duke GT Series Specifications

General

Displacement	1301 cc
Transmission	6-speed
Bore x Stroke	108 mm x 71 mm
Front Tire	120/70 ZR17
Rear Tire	190/55 ZR17
Torque	140 Nm @ 8000 rpm
Fuel Capacity	23 liters
Seat Height	835 mm
Cooling System	Liquid Cooled
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP monoshock
Front Brake	Dual 320 mm discs, 4-piston calipers
Rear Brake	Single 240 mm disc, 2-piston caliper
Traction Control	MTC (Motorcycle Traction Control)
Frame	Chromoly steel trellis frame, powder coated
Dry Weight	205 kg
Wheelbase	1482 mm