8 ERGONOMICS 60
8.7 Checking the basic position of the shift lever
400692-10
–
Sit on the vehicle in the riding position and determine distance
A
between the upper
edge of your boot and the shift lever.
Distance between shift lever and upper
edge of boot
10… 20 mm (0.39… 0.79 in)
» If the distance does not meet specifications:
–
Adjust the basic position of the shift lever. x ( p. 60)
8.8 Adjusting the basic position of the shift lever x
L01417-10
–
Loosen nut
1
, holding the threaded rod
2
.
Info
Nut
1
has a left-handed thread.
–
Loosen nut
3
, holding the threaded rod
2
.
–
Turn threaded rod
2
to adjust the shift lever.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle components
during the shift procedure.
–
Tighten nut
3
, holding the threaded rod
2
.
To Next Page
Loading...
