To Next Page

To Previous Page

10 SERVICE SCHEDULE 40

10.2 Service work (as additional order)

Annually

Every 80 operating hours/every 40 operating hours when used for motorsports

Every 40 operating hours

Once after 10 operating hours

Change the front brake fluid. ●

Change the rear brake fluid. ●

Change the hydraulic clutch fluid. ( p. 78) ●

Grease the steering head bearing. ( p. 64) ●

Check/set the carburetor components. ● ●

Perform a fork service. (EXC, XC‑W) ○ ● ●

Perform a fork service. (Six Days) ○ ● ●

Service the shock absorber. ● ●

Check the starter drive. (All 200/250/300 models) ● ●

Change the piston and check the cylinder. (All 125 models) ● ●

Change the piston and check the cylinder. (All 200/250/300 models) ●

Change the connecting rod, conrod bearing and crank pin. ●

Check the transmission and shift mechanism. ●

Change all engine bearings. ●

○ One-time interval

● Periodic interval

Other manuals for KTM 250 EXC

Questions and Answers:

Need help?

Do you have a question about the KTM 250 EXC and is the answer not in the manual?

General

Displacement	249 cc
Cooling System	Liquid cooled
Transmission	6-speed
Starter	Electric starter
Rear Suspension	WP Xplor PDS shock absorber
Fuel Capacity	9 L
Seat Height	960 mm
Bore x Stroke	66.4 mm x 72 mm
Ground Clearance	370 mm
Engine Type	2-stroke
Front Suspension	WP XPLOR 48
Front Brake	Disc brake
Rear Brake	220 mm disc
Frame	Chromium-Molybdenum steel central-tube frame