ENGLISH
12
Check engine oil level
Change engine oil
Clean oil screen and magnet of the drain plugs whenever you exchange the engine oil
Change oil filter unit
Change microfilter
Check oil lines for leakage and proper instalment
Check valve clearance
Clean spark plug and adjust electrode gap
Change spark plug after 10 000 kilometers (6 200 miles)
Check valve clearance
Drain and clean carburator float bowl
Adjust idling
Check breather hoses of engine gase and gas tank for correct position without buckles
Clean air filter and air filter box
Check sprockets, chain guides and chain for wear
Clean and lube chain
Check chain tension
Check cooling liquid level
Check quality of antifreeze
Check cooling system for leaks
Check exhaust system for leakage
Change exhaust muffler packing (aluminium-muffler)
Check exhaust brackets
Disassemble and clean spark arrestor discs (USA models)
Check brake fluid level front and rear
Change brake fluid
Check brake pad thickness
Check brake discs for wear and wobbling
Check condition and correct instalment of brake hoses
Check freeplay and easy operation of hand brake lever and foot brake lever
Check adjustment and function of fork
Check fork for leaks
Loosen breather screws at fork legs (overpressure)
Change fork oil
Perform a full maintenance job for the telescopic fork
Clean dust scrabber on forks
Check steering head bearing clearance / adjust
Clean and grease steering head bearings and its seals
Check adjustment and funktion of shock absorber
Check O-ring of the shock absorber for wear
Servicing the shock absorber
Grease lubricating nipple of the Pro Lever suspension system
Disassemble the Pro Lever suspension system and perform a full maintenance job on it
Servicing swingarm pivots
Check tightness of spokes and rim join
Check wheel bearings for clearance
Check tire condition and air pressure
Check cables for damage and easy working
Lube and adjust cables
Check the electrical system
Check adjustment of head light
Spray ignition lock, emergency OFF switch, short circuit button, and light switch with contact spray
Check all screws, nuts and hose clamps for proper tightness
Grease or lube all pivot points and sliding components
PERIODIC MAINTENANCE SCHEDULE
before each start
after washing
1st service, after
1000 km (600 miles)
or 10 hours
after 2500 km
(1500 miles)
or 25 hours
after 5000 km
(3000 miles) or
once a year
at least once a year
KTM
rider
KTM
dealer
IF THE MOTORCYCLE IS USED PRIMARILI FOR OFF ROAD
RIDING OR COMPETITIVE RACING, THE 5000 KM (3000 MILES)
SERVICE NEEDS TO BE CARRIED OUT AFTER EACH RIDE OR RACE
2.99
620 SX
400/540 SXC
400/620 SC
To Next Page
Loading...
