Kubota D722-E - Page 158

5.1 ENGINE BODY
68 mm STROKE SERIES WSM, 01 160
Factory
Backlash between spec.
[3] TIMING GEAR AND CAMSHAFT
0.043 to0.124 mm
0.001 69 to 0.00488 in.
8088P034
Factory
spec.
Allowable
limit
Oil clearance
of
camshaft journal
I-
---
---r
0.050 to0.091 mm
0.0020
to 0.0036 in.
0.15 mm
0.0059 in.
Timing Gear Backlash
Camshaft journal
O.D.
Factory 32.934to 32.950 mm
spec.
1.2966 to 1.2972 in.
I
1 ;.yble I 0.15 mm
0.0059 in.
Cylinder block bore
I.D. (Bearing portion)
Factory
0.047 to0.123 mm
0.00185 to 0.00484 in.
limit 0.0059
in.
Backlash between
idle gear and cam
gear
Factory 33.000
to 33.025 mm
spec. 1.2992
to 1.3002 in.
Factory 0.046to0.124mm
0.00181 to0.00488 in.
injection pump gear
Backlash between
idle gear and
Factory 0.041 to 0.123 mm
Backlash between oil
pump gear and crank
gear
0.00161 to 0.00484 in.
0.0059 in.
limit
xa
0 109P03 ‘t
5-97