G-10
M6800 · M6800S · M8200 · M9000, WSM
G GENERAL
• Use sandpaper to remove rust from terminals.
• Repair deformed terminal. Make certain there is no terminal
being exposed or displaced.
W1012346
• Make certain that there is no female connector being too open.
W1012430
• Make certain plastic cover is large enough to cover whole
connector.
W1012519
[5] HANDLING OF CIRCUIT TESTER
• Use tester correctly following manual provided with tester.
• Check for polarity and range.
W1012684
(1) Exposed Terminal
(2) Deformed Terminal
(3) Sandpaper
(4) Rust
(A) Correct (B) Incorrect
(1) Cover (A) Correct
(B) Incorrect