OC60-E2, OC95-E2, WSM GENERAL
G-12
Press Gauge
Code No : 07909-30241
Application : Use to check the oil clearance between
crankshaft and bearing, etc..
Measuring : Green.....0.025 to 0.076 mm (0.01 to 0.03 in.)
range Red.........0.051 to 0.152 mm (0.02 to 0.06 in.)
Blue.........0.102 to 0.229 mm (0.04 to 0.09 in.)
Diesel Engine Compression Tester
Code No : 07909-30208 (Assembly) 07909-31251 (G)
07909-30934 (A to F) 07909-31271 (I)
07909-31211 (E and F) 07909-31281 (J)
07909-31231 (H)
Application : Use to measure diesel engine compression and
diagnostics of need for major overhaul.
Valve Seat Cutter
Code No : 07909-33102
Application : Use to reseat valves.
Angle : 0.785 rad (45 )
0.262 rad (15 )
Diameter : 28.6 mm (1.126 in.) 38.0 mm (1.496 in.)
31.6 mm (1.244 in.) 41.3 mm (1.626 in.)
35.0 mm (1.378 in.) 50.8 mm (2.000 in.)
Oil Pressure Tester
Code No : 07916-32032
Application : Use to measure lubricating oil pressure.
0000009383E
(1) Gauge (7) Adaptor F
(2) L Joint (8) Adaptor G
(3) Adaptor A (9) Adaptor H
(4) Adaptor B (10) Adaptor I
(5) Adaptor C (11) Adaptor J
(6) Adaptor E
0000000680E
0000000682E
(1) Gauge (5) Adaptor 2
(2) Cable (6) Adaptor 3
(3) Threaded Joint (7) Adaptor 4
(4) Adaptor 1 (8) Adaptor 5
0000000681E
To Next Page
Loading...
