KUHN FC2860TLD - Coupling and Uncoupling; Description of Coupling Elements; Preparing the Tractor

6. - Putting into service
FC2860TLD-3160TLD-3560TLD
35
KN281CGB_L
Mower conditioner
6.2 Coupling and uncoupling
6.2.1 Description of coupling elements
• A PTO shaft 1 3/8’’ - 6 splines.
• 2 check chains (Optional equipment - Only for
France).
• A hose that controls the mowing unit
raising/lowering.
• Two hydraulic hoses controlling the drawbar shift
cylinder.
• A 7-pin electric plug for the electrical signalling
equipment.
6.2.2 Preparing the tractor
The machine adapts to tractors fitted with a 3-point
hitch coupler category 2 or 3N.
The tractor must be fitted with lower link
stabilizers.
- Check that pto speed matches the
Gyrodine swivel hitch input speed.
540