FC2860TLD-3160TLD-3560TLD
46
7. - Instructions for transport
KN281CGB_L
Mower conditioner
7. Instructions for transport
Before placing the machine into transport
position:
- Wait until the rotating parts have come to a
complete stop.
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the person
moves away.
7.1 Transport position
The machine is in transport position when the
following instructions have been respected:
• The mowing unit is raised.
• The lift cylinder valves are shut.
• The drawbar is folded.
• The drawbar shift cylinder valve is shut.
• The side guards are raised.
- Never engage the tractor PTO drive when
the machine is in transport position.
To Next Page
