KUHN FC2860TLD - Inspection of Knives and Securing Elements

FC2860TLD-3160TLD-3560TLD
80
11. - Maintenance and storage
KN281CGB_L
Mower conditioner
 Side gearbox
- Check side bevel gearbox oil level:
• The oil level must reach lower part of level plug
hole.
11.4.2 Inspection of knives and securing
elements
- Immediately replace worn or damaged parts
with genuine KUHN parts.

Knives
- Inspect systematically all knives before the
machine is operated to:
• ensure the cutting quality.
• ensure safety in use.
• Prevent cutterbar damage risks.
- Replace knives in the following cases:
• Damaged knives.
• Very rough conditions can cause knives to
crack and become deformed.
• Worn knives.