11. - Maintenance and storage
FC2860TLD-3160TLD-3560TLD
97
KN281CGB_L
Mower conditioner
11.4.5 Rotor maintenance
Finger replacement
- Immediately replace worn or damaged
parts with original manufacturer parts.
When replacing a finger, also change the one
completely opposite to respect the rotor's
balance.
- Respect mounting order.
- Fit roll pins at 180° to each other with slots lined up
in the direction of the main load.
- Respect the position of short and long
fingers to avoid interference with the cutter
bar.
FC2860TLD:
FC3160TLD:
FC3560TLD:
To Next Page
Loading...
