GF8702
20
4. - Safety
KN142BGB G
Gyrotedder
4.2.11 Precautions to take before using the parking stands
134138: Specific requirements for countries member of the Eurasian Economic Community (EAC marking).
134139: Specific requirements for countries member of the Eurasian Economic Community (EAC marking).
133983: Specific requirements for countries member of the Eurasian Economic Community (EAC marking).
133987: Specific requirements for countries member of the Eurasian Economic Community (EAC marking).
133988: Specific requirements for countries member of the Eurasian Economic Community (EAC marking).
4.2.12 Precautions during manoeuvres
When moving the machine from the transport
position to the working position and vice versa,
make sure that nobody is within the machine
pivoting area.
4.2.13 Remote controlled components
- Danger of crushing and shearing can exist when
components are operated by hydraulic or
pneumatic controls. Keep away from these danger
zones.
4.2.14 Tyres
- Regularly check the tyre pressure. Respect
manufacturers' recommendations on pressure.
Assembly, disassembly and repair of wheels and
tyres must only be carried out by competent
persons who are equipped with standardized tools.
Before any work is performed on the wheels,
ensure that the machine rests on the ground and is
perfectly stable so that it cannot move accidentally
(put chocks in place).
To Next Page
