6. - Putting into service
GF8702
39
KN142BGB G
Gyrotedder
6.2.3 Preparing the machine
Linkage adjustment
The machine adapts to tractors fitted with a 3 point
linkage category 2.
3 point, Category 2:
- Place lower links in position (a).
Check the horizontal setting of the lower links.
6.2.4 Coupling the machine
- Position tractor lower links inside machine
attachment yokes.
- Position ball joints of tractor lower links in line with
holes of machine lower yokes.
- Insert lower hitch pins and secure them with lynch
pins.
a
To Next Page
