10. - Maintenance and storage
GF8702
63
KN142BGB G
Gyrotedder
10. Maintenance and storage
10.1 Adjustments in working position
- Before carrying out any maintenance or
repairs on the machine, switch off the
tractor engine, remove ignition key, wait
until all moving parts have come to a
standstill and apply park brake.
10.2 Frequency chart
Maintenance intervals are indicated for
normal conditions of use.
• Grease all moving parts.
Regular greasing is a form of insurance against
premature defects and subsequent repairs. It
also helps to increase the service life of the
machine.
To Next Page
