KUHN GF8702 - Replacing a Tine

10. - Maintenance and storage
GF8702
69
KN142BGB G
Gyrotedder
10.4.3 Replacing a tine
Before leaving the tractor or before
adjusting, maintaining or repairing the
machine, disengage the PTO drive, turn off
the engine, remove ignition key and wait until
all moving parts have come to a complete
stop and apply park brake.
2 types of tines are fitted on the machine:
• Tines (1) for rotors rotating clockwise (a).
• Tines (2) for rotors rotating
counterclockwise (b).
- Check that the tines are fitted properly with regards
to the rotor direction of rotation.
From the working position:
- Remove attachment screw (1).
KUHN
1
2
a
b
a
b
a
b
a
b
1