KUHN GF8702 - Pto Shaft; Grease

10. - Maintenance and storage
GF8702
65
KN142BGB G
Gyrotedder
The pictorials show the points to be greased.
- Clean grease nipples before greasing.
Lubricate with multi-purpose grease grade
NLGI 2.
10.3.1 Pto shaft
Before using the machine for the first time:
- Grease the transmission.
• During intensive use with tractors of
maximum authorized power, it is
recommended to grease at closer
intervals.
Every 50 hours:
• U-joints (1).
• transmission tube (2).
• Guide rings (3).
• The torque limiter (4).
10.3.2 Grease
• The outer wing pivot pins.
1
1
2
3 3
4