A hydro
-
pneumatic accumulator contains
nitrogen under pressure (risk of suffocation in
closed rooms).
Repairs, maintenance or commissioning may
only be carried out by competent persons. Wait
for the accumulator to cool down before handling it. Only use nitrogen to precharge it.
Depressurize the gas and fluid sides of the hydraulic accumulator before opening it.
It is strictly forbidden to weld, grind or drill onto a hydro
-
pneumatic accumulator.
Make sure that the accumulator and its' fittings are in good condition.
Safety decals
Safety warnings are placed in safety decal form on various parts of the machine. They are there to warn
you of potential dangers and to tell you how to avoid accidents.
Always keep the safety decals clean and readable, and replace them when they are worn, damaged,
missing or illegible.
Waste disposal
Respect the environment! Never spill pollutants
(oil, grease, filters, etc.) on the ground, never
pour them down the drain and never discard
them in any other place where they could
pollute the environment.
Never throw away or burn a tire.
Always take waste to specialized recycling or waste disposal centers.
To Next Page
