Step 6.
Reinstall O
-
ring (5).
Fit spacer (4).
Reinstall wavy washer (7).
Reinstall compensation volume (6).
Reinstall angle gearbox (3).
Reinstall the 8 bolts (1) and nuts (2).
Torque:
1289
.
Reinstall side skid (3).
Reinstall the 2 brackets (2).
Reinstall the 4 bolts (1).
Reinstall cutterbar on the chassis.
Step 1.
Fill gearbox with necessary oil quantity
.
To Next Page
Loading...
