Optional equipment
Power harrow
HR6004DR
53
Description of safety decals
Crushing area (1)
Never operate in an area where there is a crushing risk
before all moving parts have come to a complete stop.
Additional machine lowering (2)
Make sure that the additional machine rests on the
ground:
- Before turning off the engine
- Before carrying out any maintenance or repair on the
machine
- Before parking the assembly
Crushing hazard.
Putting into service
Hydraulic connection
Connect hydraulic hose (1) to a single acting outlet.
Adjustments
Attachment brackets:
The attachment hooks can be fitted in 6 different
positions to obtain best adaptation of the additional
machine.
Tightening torque: 42 daN m (309 lbf ft):
To Next Page
Loading...