Power harrow
74
HR6004DR
Maintenance and storage
Checking the blades and their mounting
hardware
Blades
Replace blades in the following cases:
- When the degree of wear L reaches 150 mm (6’’).
- When there is visible distortion.
Immediately replace worn or damaged parts with
genuine KUHN parts.
Using blades that are excessively worn can
cause premature damage to holders, rotors or
troughs.
We recommend to use hard coated blades in
abrasive soils:
DURAKUHN hard coated blade rotating to the
left (Part no. K2500260).
DURAKUHN hard coated blade rotating to the
right (Part no. K2500270).
Regularly check that there are no foreign
objects wrapped around the blade holder
(twine, wire, crop residues,...). Remove them.
To Next Page
Loading...