Maintenance and storage
Power harrow
HR6004DR
75
Blade replacement
From the transport position:
- Clean the blade holder to clear the lynch pin.
- Pivot lynch pin ring using unlocking key supplied with
the machine (Part no. 52598210).
- Remove lynch pin (1).
- Remove connecting piece (2).
Before leaving the tractor or before
adjusting, maintaining or repairing the
machine, disengage the PTO drive, turn off
the engine, remove ignition key and wait until
all moving parts have come to a complete
stop and apply park brake
Check that locks are engaged.
To Next Page
Loading...