Maintenance and storage
SpeedRake
SR108 SR110 SR112
39
3. Storage
At the end of each season
- Clean the machine thoroughly.
- Put the machine under cover in a dry place.
- Retract all hydraulic cylinders and coat the exposed
parts of ram rods with lubricant.
- Replace any damaged or missing safety decals.
- Replace all parts that are worn or damaged with KUHN
original parts.
At the start of each season
- Re-read the operators' manual.
- Check tire pressure. Refer to the technical
specifications' chart.
- Make sure all the guards are in place.
- Lubricate all grease points.
- Torque the transport wheel lug nuts to 120 ft lbs (163
daNm).
- Check tightness of all bolts and nuts on rake assembly,
particularly on rake wheels.
To Next Page
Loading...
