6
Once the setup is completed, you will reach the Windows Start screen. In order to
make sure the device is safe for the kids, be sure to create a child’s account.
If no child’s account is created, the child will have full access to the tablet with no
parental control.
Basic Connections
First Setup
Charging the tablet
Note: If using the tablet for the first time, or after a long period of idle time, charge
the battery for more than half an hour before turning it on, to ensure system stability.
When the device is launched for the 1st time, user will have to follow the Windows
setup procedure.
Parental supervision is recommended for the 1st setup.
The tablet has a built-in Lithium-Polymer rechargeable battery. Charge the device
when the battery level is low.
1. Plug the power adapter into the DC-In socket.
2. Connect the power adapter to an electrical outlet and charge the tablet until the
battery is fully charged.
Note:
1. The battery may not be fully charged when you unpack your tablet.
2. A fully discharged battery takes about 5 hours to fully charge.
3. When the battery is being charged, the LED indicator lights orange, and when the
battery has been fully charged, the LED indicator lights green.
Caution:
1. Charge the battery in an ambient temperature between 0 °C to 35 °C.
2. Use only the supplied power adapter to charge your tablet. Using
unauthorized power adapters may severely damage it.
To Next Page
Loading...
Need help?
General
